First steps with the STIM-PRO X9B
To make starting with our new 4-channel TENS EMS device as easy as possible for you, we have compiled the most important settings and functions as videos.
If you have any further questions, our medical device consultants will be happy to assist you by email or telephone during business hours
Set a Program and Application Duration
To easily select your desired program and start the application:
- To switch on the device, press and hold the ON button for about 2–3 seconds.
- Once the main screen appears, press the SET button. The program display will blink, allowing you to select your desired program using the + and - buttons. Confirm your selection by pressing the SET button.
- The timer display below the program display will now blink. "C" stands for continuous operation. You can adjust the timer in 5-minute increments by pressing the + and - buttons. Confirm your selection by pressing the SET button.
- Press the button for the channel (CH1-CH4) for which you want to adjust the intensity. Once the number blinks, you can adjust the intensity for each channel from 0–99 using the + and - buttons.
Activate/Deactivate Key Lock Function and Pause the Application
The key lock (lock symbol) activates automatically a few seconds after starting a program. You can also activate it manually by pressing the + and - buttons simultaneously. The same combination can deactivate the lock at any time.
For safety reasons, the pause button at the bottom left of the control panel works even when the key lock is active. To resume the application, press the pause button again. The intensity will gradually increase to your preset value for a more comfortable experience.
Increase the Intensity of All Channels Simultaneously
Our device features 99 intensity levels per channel, offering exceptionally fine adjustments rarely found in similar devices. Adjusting each channel individually can be tedious, as highlighted in your feedback on our STIM-PRO X9+.
Therefore, you can increase or decrease the intensity of all channels simultaneously. Hold down the pause button until all four numbers at the top of the display blink. You can then adjust the intensity with the + and - buttons and confirm with the SET button.
If not all channels are connected, our STIM-PRO X9B detects this and sets the intensity of unused channels to 0. This safety feature also conserves battery power.
Let customers speak for us
+++
+++
Das Moorkissen hat eine gute Größe und ist mit mehr Moor gefüllt, als das Kissen für den Lendewirbel. Es speichert die Wärme gut und es lässt sich einfach im Wasserbad erhitzen. Wie lange es bei täglichen Gebrauch hält, weiß ich noch nicht. Preis-Leistungs-Verhältnis ist in Ordnung.
Produkt wie angegeben. Freundliche Unterstützung durch die Mitarbeiter. Alles bestens
Die Seite ist übersichtlich gestaltet und ermöglicht eine einfache Suche und Bestellung. Lieferung erfolgte schnell mit sicherer Verpackung.
Gute Haftung, wie bei den original elektroden von prorelax, aber günstiger.
Gerne wieder
Passt alles!
gerne wieder
Kleine Mengen an die Stelle wo es in Kombination mit EMS wirken soll reichen schon aus.
Hilft auch bei Pulsmessuhren.
Erstklassige Qualität.
Sehr langlebig.
Absolut zu empfehlen für Schultern, Rücken und Oberschenkel.
Super Produkt.
Passt auch zu meinem EMS der Marke Quigg.
Die Elektroden haben eine gute Qualität
Sehr gutes Gerät welches keine Wünsche offen lässt
